gear mechanism

gear mechanism

美 　英

• 网络齿轮机构；齿輪机构式；蜗齿减速器

例句

Leibniz also invented the stepped gear mechanism for the addend digit introduction, and to this day is still being used.

莱布尼茨还发明了加数位齿轮加强引进机制，到今天仍在使用。

The upper support includes unitary molded-in journals supporting components of gear mechanism.

上层的支持包括单一模在期刊，支持齿轮机构组成部分。

A calculating formula for rotational speed derives from movement characteristic equation of one bank planet gear mechanism.

以单排行星齿轮机构一般运动规律的特性方程式为基础，导出了输出轴转速的计算公式。

Part of a rotation of the drive gear mechanism, partly based on take-off and landing gear and rack body.

旋转部分采用了齿轮机构传动，升降部分采用了齿轮齿条机构。

The results show that response frequency of gear mechanism will be reduced by gear backlash and multi-frequency phenomenon will occur.

计算结果表明，齿侧间隙的存在会降低机构的响应频率，并会产生多频现象。

Gear mechanism is widely used in modern machinery.

齿轮机构在现代机械中应用十分广泛。

Disengage the clutch (ie from the gear mechanism) before changing gear.

先松开离合器再换挡。

lt is incomplete to calculate the freedom of plane gear mechanism regarding gearpair as higher pair.

指出将齿轮副作为高副来计算平面齿轮机构自由度是不全面的。

The involute spherical gear mechanism has twos degree of freedom and it can be used to deliver 2D motion.

球齿轮是一种不同于传统齿轮的新型齿轮，球齿轮机构具有2个传动自由度，它用来传递二维回转运动。

The Elastohydrodynamic Lubrication Research on the Planetary Gear Mechanism of a Helicopter

某型直升机行星齿轮机构弹流润滑研究

A Study on a Planet Gear Mechanism Being Able to Adjust Revolving Arm Length

可调系杆长度的行星齿轮机构设计研究

The design and research of planet gear mechanism being able to send out planet motion

可输出行星运动的行星齿轮机构设计研究

Study of solid self-lubrication technology for compound wheel and gear mechanism of air compressor

空压机复合轮齿机构固体自润滑技术研究

Predicting Abrasion Values on Tooth Surfaces of Designed Gearing through the Use of Transmission Parameters of Existing Gear Mechanism

利用现有齿轮机构传动参数预测所设计齿轮机构轮齿面磨损量

The Kinematical Properties Analysis and Simulation of Differential Planet Non-circular Gear Mechanism

非圆齿轮机构运动轨迹微分几何研究

Optimal Design of Cam-linkage-gear Mechanism for the Paper- transferring Mechanism with Variable Speeds

凸轮连杆齿轮变速输纸机构优化设计

The Fuzzy Genetic Optimization Method of Close Planet Gear Mechanism While Randomness and Fuzziness are Considered

遗传优化随机模糊性时封闭行星齿轮机构

Study on Computation Method of Transmission Ratio and Meshing Efficiency of Complex Planetary Gear Mechanism

复合行星齿轮机构的传动比及啮合效率计算方法研究

Dynamic simulation of involute zero-tooth-difference internal gear mechanism

渐开线零齿差内啮合齿轮副啮合过程动态仿真

An Intermittent Mechanism--Incomplete Gear Mechanism

间歇机构--不完全齿轮机构设计及应用

smooth running . big pressure and low noise are obviously remarked as helical gear mechanism is adopted

采用斜结构，运转平稳压力大噪声低。

The approximate uniform movement of output link realized by eccentric gear mechanism

用偏心齿轮连杆组合机构实现两行程等速运动

Evolution and Innovation of the Parallel Moving Gear Mechanism

平动齿轮机构的演化与创新

step mechanism incomplete gear mechanism non-circular gear mechanism

不完全齿轮机构非圆齿轮机构槽轮机构棘爪棘轮

Calculation on engaging efficiency of parallel moving gear mechanism according to average sliding velocity method

按平均滑动速度法计算平动齿轮机构的啮合效率

Modern Engine's Shifty Valve Gear and Electromagnetic Valve Gear Mechanism

现代发动机可变配气系统及电磁气门驱动机构

Analysis on the least gears in gear mechanism

理论上最少齿数的分析计算

Tabular Method of Kinematics Analysis of Planetary Gear Mechanism

行星齿轮机构运动分析的列表法研究

The Application of Planetary Gear Mechanism at Electric Wrench

行星齿轮机构在电动扳手中的应用

Functions of One-Way Clutches in Simpson Planet Gear Mechanism of Automotive Auto Trans

汽车自动变速器辛普森机构中单向离合器的作用分析

The implementation of automatic changing gear mechanism of automobile gaerbox

汽车变速箱自动换档机构及其电气实现

Establishment and experimental study on dynamics model of gear mechanism based on nonlinear theory

基于非线性理论的齿轮机构动力学模型的建立及实验

Research on Tooth Profile Wear of Involute Gear Mechanism

渐开线齿轮机构齿廓磨损的研究

Analysis of Low-number Teeth Involute Spur Gear Mechanism

少齿数渐开线圆柱齿轮机构的研究

as a result , it is necessary to research how spherical gear mechanism be utilized with flexible multi - link manipulator

因而研究将球齿轮机构用于柔性多关节机械手很有必要。

A Parametric Design and Simulation of Gear Mechanism

齿轮机构的参数化设计与仿真

Analysis of Assist Steering Based on Electric Power and Differential Gear Mechanism

基于差动轮系机构的汽车电动助力转向系统研究

Better Designs of Fan-Shaped Gear Mechanism

扇形齿轮机构运动参数的优化

Design of pitch curve of non-cicular planetary gear mechanism

非圆行星齿轮机构节曲线的设计

The Simulation of Gear Mechanism Movement Based on VRML

基于VRML的齿轮机构运动仿真